← All guides

Why calls freeze: latency, jitter and packet loss explained

By the SPAKO team · Published 2026-10-26 · 6 min read

Why calls freeze: latency, jitter and packet loss explained

Three technical terms explain almost every bad call. Here is what each one means, how to spot it and what can be done.

When a call stutters, freezes or sounds like a robot, three things are usually responsible: latency, jitter and packet loss. They are often lumped together as “lag”, but they are different problems with different fixes.

How a call travels

Your voice is turned into a stream of small chunks of data called packets. Each packet holds a few milliseconds of sound or a piece of a video frame. The packets travel through your Wi-Fi or mobile network, across the internet, and through the other person’s network, and are put back together into sound and picture. For a call to feel natural, this has to happen continuously and quickly.

Latency: how long a trip takes

Latency is the time one packet takes to get from you to the other person. It is measured in milliseconds. Below about 150 ms in one direction, conversation feels natural. Above about 300 ms, people start talking over each other. Satellite links, long distances, and congested mobile networks all raise latency. You cannot fix distance, but you can avoid adding to it with a bad Wi-Fi hop or a crowded network.

Jitter: an uneven rhythm

Jitter is variation in latency. If packets arrive 40 ms apart, then 10 ms, then 120 ms, the audio has to be played at a steady pace, so the app uses a small waiting area called a jitter buffer to smooth them out. A bigger buffer hides more jitter but adds delay. A smaller one keeps the call responsive but lets glitches through. This trade-off is one of the main things a calling app has to manage well.

Packet loss: pieces that never arrive

Packet loss happens when packets are dropped, usually because a network is congested or the radio signal is weak. A little loss, around 1 to 2 percent, can be repaired by the app. More than that causes missing syllables in audio and frozen or blocky video. Loss is especially common on weak Wi-Fi and mobile signal at the edge of coverage.

How apps cope

Good calling software has several tools for this:

How to tell which one you have

  1. Everyone seems to answer late, but sound is clean: latency.
  2. Sound is clean for a few seconds, then speeds up or slows down: jitter.
  3. Words are missing or the voice sounds robotic: packet loss.
  4. Picture is blurry but sound is fine: low bandwidth, which is related but different.

What you can do

You cannot repair the internet, but you can improve your own end. Move closer to the router, stop other uses of the connection, switch between Wi-Fi and mobile data, and drop to voice when video struggles. The article on getting a clear video call on a weak connection has a full checklist.

Why this matters for apps

Most apps are built and tested on fast, stable connections, and they behave badly when conditions are poor. A calling app designed for weak networks treats loss, jitter and low bandwidth as normal and plans for them. That is the reasoning behind SPAKO’s focus on calls that stay usable where others give up.

Written by the SPAKO team. These guides are general information, not professional advice. See how we write them on our About page, or write to hello@getspako.com to suggest a correction.

More guides